I know that it can be very difficult to have issues with your washer. You did not indicate if the washer motor is actually running or humming when set into the spin mode with the lid down. If the washer motor is running during the drain and spin cycle it would have to have a blockage in the tub hose, drain pump or drain hose.If the washer motor will run during the agitation cycle but will not run in the spin and drain mode that would most likely be caused by a broken lid switch. If the lid switch does not close when the lid is shut the washer motor will not run while it's in the spin and drain cycles. Check to confirm that the lid strike is still attached to the bottom of the lid and not broken off or missing. The lid strike must make contact with the lid switch in order to close the switch or it will not run at all in the spin and drain cycle. You should hear a faint click of the lid switch closing when the lid is just about fully closed. If your motor will operate in the wash cycle and the pump clicks or hums, then you will need to replace the pump. If you don't feel comfortable doing this yourself, just click on this link to schedule service: Sears Home Services . I hope this helps. If you need further assistance, please reply to this thread. Thank you for using Manage My Life.
Ready to buy what you need?Shop now
Still have questions?Ask us
Need expert repair service?Schedule now
“This is a great place to go for advice, especially if you're low on funds and you could resolve the problem before calling and paying a service call, if it's an easy fix. I'm glad you are there for me.”