Kenmore range - disconnecting the control panel
Hi, I have a Kenmore electric range, model #790.95741991. Yesterday it started beeping and showing the F1 error code. Hitting cancel and unplugging the unit didn't resolve the problem. I learned that the control panel/clock is most likely the problem, so I took the back panel off to examine the control panel. I have disconnected the five main wires (white, rose, blue, black, yellow) from the panel to stop the beeping and ordered part #316101001. The part takes 1 week to arrive, I was told, but I Really need a functioning stove top before then. Can I leave the control panel wires disconnected, wrap them in electrical tape, and plug the range back in to use the burners until the replacement part arrives or is that really risking electric shock? Thanks, Rachel
James
Expert
I'm sorry to hear that you are having some difficulties with your Kenmore Range. I did some research for you at Managemylife.com and found an expert answer to a similar question that may help until your expert can respond to your specific question. The link is attached below. The expert who will assist you, can walk you through a repair like this or let you know if this may be something a technician should perform. He can also verify parts that may be required for you to order. If you do decide to schedule service and have a qualified technician help you, I have also attached a link to Searshomeservices.com. I hope these links provided assist you. It
Rachel
Newbie
Thanks, James. The link you attached was the link for this page. Do you still have the other link with a similar question/answer? Thanks again!
Jimmy k
Expert
If you wrap the ends of the wires with electrical tape and position them so they don't overheat, you can use the top burners without causing a problem.
Join this conversation.
Member
Start smart
-
Ready to buy what you need?
Shop now -
Still have questions?
Ask us -
Need expert repair service?
Schedule now
“This is a great place to go for advice, especially if you're low on funds and you could resolve the problem before calling and paying a service call, if it's an easy fix. I'm glad you are there for me.”
