My Kenmore washer model number 110.26812690 won't stop filling with water and overflows regardless of the water level setting. What's the problem?
I see you are having problems with your washer. Something that I would suggests is going on to Sears Home Services and scheduling for a technician to go and fix the problem. I have attached the link below if you are interested in doing while waiting on your response from an expert. Hope this helps!
From the description you give I suspect the water level switch or hose is the problem.If the washer is overflowing then the first thing to do is turn the timer off or unplug the washer. If water still comes then the valve is the problem. If the valve will stop filling with the timer off then the problem is with the water level switch, hose or air trap. What I suggest for this is to empty the washer and then access the water level switch and remove the plastic hose. Check the hose for any kinks or small pin holes. Try to blow through the hose towards the air trap. You should be able to blow without to much effort. You might even hear bubbles from the air trap. If you can't blow through it then the air trap is blocked. If you can blow through it then hook it back up and try another cycle. If the air trap and hose are okay and still the water doesn't shut off then most likely the pressure switch is the problem. Any parts you need can be obtained from the following link: Sears PartsDirect .The images below may be helpful to you. Remember to unplug the washer first.
Ready to buy what you need?Shop now
Still have questions?Ask us
Need expert repair service?Schedule now
“This is a great place to go for advice, especially if you're low on funds and you could resolve the problem before calling and paying a service call, if it's an easy fix. I'm glad you are there for me.”