Cannot program clickers for garage door openenr 139-53970SRT- used to work but now doesn't
Have used the clickers for many years- then all of a sudden only one opener would work- unable to program the others we have here after following directions from manual- getting frustrated.
B b g...
Expert
Either the remote is bad or the logic board. If you are following the directions on the clicker and get no action and you are sure the battery is good, go up to the opener and press the button and look at the led light by the learn button. Does it flicker when you press the remote button? If it does then the remote is transmitting and the opener is not receiving it right and you will need a new external receiver or logic board. If nothing then you will need a new remote. You can go to searspartsdirect.com for replacement parts. You can even get a remote that was made for your opener. Thanks BB
Join this conversation.
Member
Start smart
-
Ready to buy what you need?
Shop now -
Still have questions?
Ask us -
Need expert repair service?
Schedule now
“This is a great place to go for advice, especially if you're low on funds and you could resolve the problem before calling and paying a service call, if it's an easy fix. I'm glad you are there for me.”
