Pressed SRT button, closed door. Now remotes & keyless system not opening door. Have a 139.53674SRT2
Did not realize Lock feature was activated when only Keyless system opened door....Pressed SRT button which stopped blinking light on door control...Closed door with door control. Now I can't open door with with remotes or keyless system. Please help.
B b g...
Expert
Sounds like you have erased the codes out of the unit. Press and release the learn button you pressed before. Then press the button on the remote and the light bulb should flash to tell you it is coded, repeat for multiple remotes. For the keyless entry press the learn button again and within 30 seconds press the 4 digit code followed by the up/down button. Again the light bulb should flash once.
If they devices don't code or one codes and loses it after another does then you have a problem with your logic board. Make sure there are new batteries installed. Thanks BBJoin this conversation.
Member
Start smart
-
Ready to buy what you need?
Shop now -
Still have questions?
Ask us -
Need expert repair service?
Schedule now
“This is a great place to go for advice, especially if you're low on funds and you could resolve the problem before calling and paying a service call, if it's an easy fix. I'm glad you are there for me.”
