Garage opener 139.53663SRT2 replaced rack part no 81C168. Need to replace again after 6 mos?
Garage opener 139.53663SRT2 rack part no 81C168. . Replaced rack about 6 mos ago Appears it needs to be replaced again? Does this need to be oiled/greased?
B b g...
Expert
This is the screw drive rack. It does need to be lubricated itself but the screw that it runs on does. It needs to be lubricated with graphite grease. Do not use any other kind or it will get all over the door and cars. Although not lubricating this part does not typically lead to failure. Unhook the opener from the door and run it up and down by hand. The door should run smooth and easy. You should be able to operate the door with two fingers up and down. If the door is not in good condition or not running correctly then this part will wear out fast. If the door is in need of adjustment or repair, call a reputable technician in your area to fix it. Springs and doors can be very dangerous. Thanks BB
Join this conversation.
Member
Start smart
-
Ready to buy what you need?
Shop now -
Still have questions?
Ask us -
Need expert repair service?
Schedule now
“This is a great place to go for advice, especially if you're low on funds and you could resolve the problem before calling and paying a service call, if it's an easy fix. I'm glad you are there for me.”
