So check my previous questions. Replaced the rpm sensor and logic board. Now no remotes work. What now?
As suggested, I replaced the RPM sensor, same failed result. Replaced the logic board, the opener works with WIRED connections, but no remotes, including car-based OEM remotes, will work (2006 Honda and 2000 Chrysler). What the heck is going on? Is the 41A4315-6G logic board compatible with previous remote controls? If so, how do I make them work? If not, WHY NOT???? Please respond soonest, an Automatic garage opener that can only be opened from inside the Garage doesn't do much good now, does it........? g
Jimmy k
Expert
I think you have your garage door opener repaired. If I understand your question correctly, you no longer have the 5 flashes of the led on the logic board, and the door now operates from the wall control.
You need to erase the codes from the logic board by holding the learn button down until the led goes off. Program the remotes into the logic board by following the instructions on the image I am sending. The 41A4315-6G logic board is compatible to the remotes.
Join this conversation.
Member
Start smart
-
Ready to buy what you need?
Shop now -
Still have questions?
Ask us -
Need expert repair service?
Schedule now
“This is a great place to go for advice, especially if you're low on funds and you could resolve the problem before calling and paying a service call, if it's an easy fix. I'm glad you are there for me.”
