How do I reprogram the keypad entry remote for my Craftsman 41a5021 opener, 139.53681b?
I've figured out how to reprogram on the the remotes, and the home link transmitter in one car. But the keypad is very important for the kids, and I can't get it to work. I pushed the "learn" button, then ran over and entered the code and held in the enter button on the keypad, but nothing seems to work. Any suggestions?
Jimmy k
Expert
You have to enter the pin and press and hold enter within 30 seconds after you press and release the learn button. Hold the enter key up to 30 seconds.
It is best before programming remotes or keyless to press and hold the learn button until the led goes off. This erases all codes in the memory of the logic board in case the memory is full. The logic board memory will hold 4-6 codes. It will reject any programming when it is full.The correct part number for the keyless for your opener is 53684. Be sure that is what you have.Join this conversation.
Member
Start smart
-
Ready to buy what you need?
Shop now -
Still have questions?
Ask us -
Need expert repair service?
Schedule now
“This is a great place to go for advice, especially if you're low on funds and you could resolve the problem before calling and paying a service call, if it's an easy fix. I'm glad you are there for me.”
